EN 573-3 Klasse AW-1098O
Lebensmittelechtes Aluminium.
Eigenschaften
Allgemeines
| Eigenschaft | Temperatur | Wert | Bedingung | Verwandte Standards | Form |
|---|---|---|---|---|---|
| Dichte | 2,7 g/cm3 | O | EN 573-3, EN 1301 | Band, Blech, Platte | |
| 20,0 °C | 2,7 g/cm3 | O | EN 573-3 | Stab, Blech, Band, Draht |
Mechanisch
| Eigenschaft | Temperatur | Wert | Bedingung | Verwandte Standards | Form | Kommentar |
|---|---|---|---|---|---|---|
| Elastizitätsmodul | -270 °C | 70,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | |
| -270,0 °C | 70,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | ||
| 70,0 GPa | O | EN 573-3, EN 1301 | Band, Blech, Platte | |||
| 20 °C | 70,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | ||
| 20,0 °C | 70,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | ||
| 20,0 °C | 70,0–72,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 20,0 °C | 72,0 GPa | O | EN 573-3 | Draht | ||
| 50,0 °C | 69,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 100,0 °C | 68,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 150,0 °C | 66,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 200,0 °C | 63,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 250,0 °C | 57,0 GPa | O | EN 573-3 | Draht, Stab, Blech, Band | ||
| 300 °C | 50,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | ||
| 300,0 °C | 50,0 GPa | O | EN 573-3 | Band, Blech, Platte, Draht, Stab | ||
| Dehnung | 25,0 % | O | EN 573-3, EN 1301 | Band, Blech, Platte | ||
| 29,0 % | O | EN 573-3 | Band, Blech, Platte | |||
| 30,0 % | O | EN 573-3 | Band, Blech, Platte | |||
| 33,0 % | O | EN 573-3 | Band, Blech, Platte | |||
| 20,0 °C | 25,0 % | O | EN 573-3 | Draht | A100 | |
| 20,0 °C | 29,0 % | O | EN 573-3 | Stab | ||
| 20,0 °C | 30,0 % | O | EN 573-3 | Blatt, Streifen | ||
| 20,0 °C | 33,0 % | O | EN 573-3 | Blatt, Streifen | ||
| Plane-Strain-Bruchzähigkeit | 22,0 - 35,0 MPa·√m | Typisch für geschmiedetes Aluminium der Serie 1000 | ||||
| Poisson-Zahl | 0,33 [-] | Typisch für geschmiedetes Aluminium der Serie 1000 | ||||
| Schermodul | 20,0 °C | 25,0–26,5 GPa | O | EN 573-3 | Stab, Blech, Band, Draht | |
| Zugfestigkeit | 40,0 MPa | O | EN 573-3 | Band, Blech, Platte | ||
| 70,0 MPa | O | EN 573-3, EN 1301 | Band, Blech, Platte | |||
| 20,0 °C | 40,0 MPa | O | EN 573-3 | Stab, Blech, Band | ||
| 20,0 °C | 70,0 MPa | O | EN 573-3 | Draht |
Thermisch
| Eigenschaft | Temperatur | Wert | Bedingung | Verwandte Standards | Form |
|---|---|---|---|---|---|
| Wärmeausdehnungskoeffizient | -50 °C | 2.18e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht |
| -50,0 °C | 2.18e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 20 °C | 2.18e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 20 °C | 2.35e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte | |
| 20 °C | 2.45e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 20 °C | 2.55e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 100 °C | 2.35e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte | |
| 100,0 °C | 2.36e-05 1/K | O | EN 573-3 | Stab, Blech, Band, Draht | |
| 200 °C | 2.45e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 200,0 °C | 2.45e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 300 °C | 2.55e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| 300,0 °C | 2.55e-05 1/K | O | EN 573-3, EN 1301 | Band, Blech, Platte, Stange, Draht | |
| Melting point | 660.0 °C | O | EN 573-3, EN 1301 | Strip, Sheet, Plate | |
| Specific heat capacity | 900.0 J/(kg·K) | O | EN 573-3, EN 1301 | Strip, Sheet, Plate | |
| 20.0 °C | 900.0 J/(kg·K) | O | EN 573-3 | Rod, Sheet, Strip, Wire | |
| Thermal conductivity | 232 W/(m·K) | O | EN 573-3, EN 1301 | Strip, Sheet, Plate | |
| 20.0 °C | 215.0 - 227.0 W/(m·K) | O | EN 573-3 | Rod, Sheet, Strip, Wire |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
| Electrical conductivity | 37500000.0 - 37700000.0 S/m | O | EN 573-3, EN 1301 | Strip, Sheet, Plate | |
| 20.0 °C | 37600000.0 - 37800000.0 S/m | O | EN 573-3 | Rod, Sheet, Strip, Wire | |
| Electrical resistivity | 2.65e-08 - 2.67e-08 Ω·m | O | EN 573-3, EN 1301 | Strip, Sheet, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
| Aluminium | 99.98 % | O | EN 573-3, EN 1301 | Rod, Sheet, Strip, Wire, Plate |
| Copper | 0.003 % | O | EN 573-3, EN 1301 | Rod, Sheet, Strip, Wire, Plate |
| Iron | 0.006 % | O | EN 573-3 | Rod, Sheet, Strip, Wire |
| 0.006 % | O | EN 573-3, EN 1301 | Strip, Sheet, Plate | |
| Silicon | 0.01 % | O | EN 573-3, EN 1301 | Rod, Sheet, Strip, Wire, Plate |
| Titanium | 0.003 % | O | EN 573-3, EN 1301 | Rod, Sheet, Strip, Wire, Plate |
| Zinc | 0.015 % | O | EN 573-3, EN 1301 | Rod, Sheet, Strip, Wire, Plate |
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing (with flux/ without flux):very good / very good, friction soldering:very good, soft brazing with flux:very good, general:very good
| |
| Corrosion properties | Seawater:acceptable, weathering:good
| |
| Workability | Bending / Spinning (cold):very good
| |
Metall